HPE EVA Storage

Continuous Access EVA4400 Status Code:201

 
JuanCG
Super Advisor

Continuous Access EVA4400 Status Code:201

Good, I have two EVAS 4400 (EVA1 and EVA2), the problem I have is that since one of them let me do Continuous Access.

I believe in a Group GR Data Replication for me cree EVA1 to a replica of a LUN in EVA2 and do it properly.

The problem comes when you then attempt to perform the same for the other EVA, from EVA2 to EVA1. Gives me the following error:


Operation failed!
Status code: 201

The EVA1 have these caracterísricas:
System
Type: HSV300
Version: 09004000
Software: CR11EFlep-09004000

The EVA2 have these caracterísricas:
System
Type: HSV300
Version: 09006000
Software: CR1276lep-09006000

I can show I'm doing something wrong or something.
2 REPLIES 2
Víctor Cespón
Honored Contributor

Re: Continuous Access EVA4400 Status Code:201

This happens when creating a DR Group?
Are you selecting a vdisk that is not already on another DR group?
Sivakumar MJ._1
Respected Contributor

Re: Continuous Access EVA4400 Status Code:201

Check the Version difference.. That might be one of the problem.. Just have a reference of EVA CA Whitepaper attached...