Could I disable buzzer of HP EVA 8100?

[Dennis-Lee]

Hi experts,

  The alerm is noisy. Could I disable it?

[Torsten. · Accepted solution]

Fix the problem and the beep will turn off!


The sound can be disabled on the EMU.

[Johan Guldmyr]

Is it disabled via the buttons on the EMU?

[Dennis-Lee]

Hi Johan,

  Yes.

Muting or unmuting the audible alarm
You may want to mute the alarm in the following situations:
• The error does not require immediate corrective action.
• You cannot correct the error at this time. For example, the error may require a replacement
part.
To mute the audible alarm:
Fibre Channel drive enclosures 37
NOTE: Er is displayed in the alphanumeric display when an error condition is present.
1. Press and hold the bottom push-button until the status indicator is On.
A muted alarm will remain off until a new condition report exists.
2. To unmute the alarm, press and hold the bottom push-button until the status indicator is Off.
When a new error condition occurs, the alarm will sound.
Disabling the audible alarm
CAUTION: Disabling the audible alarm increases the potential of damage to equipment from a
reported but unobserved fault. HP does not recommend disabling the audible alarm.
Disabling the audible alarm affects only one enclosure. This action does not affect condition report

[gregersenj]

It can also be disabled from Command View.

Or at least, it could be a few years ago, I did it my self. I'm not aware if that feature is available in all version.

I do agree on fix the problem, that's way the best solution.

BR

/jag