HPE EVA Storage

DISK GROUP AND LEVELING

 
renegade7
Occasional Advisor

DISK GROUP AND LEVELING

Hi, I have this question??

 

I have 3 disk FATA failed on FATA group . After, I have replace and add group, one disk fata 930 GB, the occupancy of the disk increase and the levelling increase. Before I replace another disk I have to waiting which the disk occupancy reaches 930 GB and levelling reaches 100% ??'

 

 

thanks for all. 

2 REPLIES 2
gregersenj
Honored Contributor

Re: DISK GROUP AND LEVELING

You don't have to wait. You can replace the other 2 failed disks, and groupe them together. it will start a new levelling.

 

If you have multible disks, failed from the same diskgroup:

wait untill it has completet the levelling.

Physically replace the disks.

From the diskgroup folder, select the diskgroup.

Select add disks

type the number of disks you want and click add.

 

here in you case, replace the other 2 disks, and add them as desriped aboav.

The levelling will restart.

 

BR

/jag

Accept or Kudo

gregersenj
Honored Contributor

Re: DISK GROUP AND LEVELING

Remember to follow prober replacement procedure!.

 

remove 1 disk, use the remove button when possible.

Wait untill the disk dissapear in command view.

Insert new disk.

wait untill it appaer under ungrouped disks.

replace the other disk(s) following same procedure.

 

If there's a remove button for the failed disk (click on the disk and select disk drive fan), click remove, confirm when asked, do not click the OK button, that appear in the top left corner of the status window.

remove disk

click ok.

 

If there's no remove button, remove the disk.

 

BR

/jag

Accept or Kudo