DS8100

 
SOLVED
Go to solution
pons_freebsd
Occasional Contributor

DS8100

I am confused about the interoperability HP C7000 with ds81000, need input from your experience...
 
dscli> ver -l
Date/Time: 12 , 2014 GMT+02:00 01:27:27 م IBM DSCLI Version: 5.3.1.101
DSCLI          5.3.1.101
StorageManager 6.1.3.20071026.1
================Version=================
Storage Image    LMC
==========================
IBM.2107-75CK811 5.3.1.104
 
 
SAN switches:
---------------------
SW1_SiteA_16B:admin> version
Kernel:     2.6.14     
Fabric OS:  v5.3.0
Made on:    Thu Jun 14 19:06:31 2007
Flash:      Wed Mar 12 01:52:12 2008
BootProm:   4.6.4
4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: DS8100

You should give more details, e.g. what interconnects are used in the C7000 etc.

BTW, the fabric OS is very old!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
pons_freebsd
Occasional Contributor

Re: DS8100

HP BladeSystem c7000 Enclosure HP BladeSystem c7000 Enclosure Management - Dual Redundant Onboard Administrator management modules Network Module Two HP 6120XG Blade Switches for HP c-Class BladeSystem; each configured with: - 16 x 10Gb downlinks to server NICs - 8 x 10Gb SFP+ uplinks (including a dual personality CX4 and SFP+ 10G (unpopulated) uplink, and two 10Gb cross-connects) SAN Module Two Brocade 8Gb SAN Switches for HP c-Class BladeSystem; each configured with: - 24 ports enabled (16 internal, 8 external) - 8 x Shortwave 8Gb SFP+ Transceivers - 8 x LC-LC OM4 Fiber Cables, 15m - Full fabric connectivity Power and Cooling 􀂃 HP BLc7000 Single Phase Power Module - Ten Active Cooling Fans - Six Redundant Hot Plug Power Supplies - The power supplies and cooling fans are installed directly into the chassisand are designed to provide redundant cooling and power for a fully configured enclosure

Torsten.
Acclaimed Contributor

Re: DS8100

First I would consider to update the switch to a more recent 7.x.x version. Then check the array for OS specific settings for the LUNs.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
pons_freebsd
Occasional Contributor
Solution

Re: DS8100

many thanks