Disk replacement in EVA4400

[Askhat]

I Problem with disk replacement in EVA4400, One is drives dead and i replacement drive at new disk. After I have add in group and see message: EVA4400-mgmt: Operation Failed

The target device is not in the right condition to perform the operation HP EVA 4400

http://youtu.be/_4vzK_bq_-o 

Please, help me! 

P.S.: Можете ответы писать на русском!

[Torsten.]

Could you please pull the disk again and check model and part no? Maybe it is not an EVA drive?

[Askhat]

P/N 9x4004-144 

[Torsten.]

Looks like a valid disk with a bit older firmware. This should not be the problem.

Could you paste a screenshot when you select the disk details in CV?

What is the EVA firmware (you will see this at the first page if you select the EVA).

EDIT:

I saw your video - there is one loop lost, we need to solve this problem first.

Check the hardware tree what elements are marked in yellow and get the details of these devices.

[Askhat]

I paste all screenshot.

Please see

I have have problem with one I/O module (attachment), may be his dead. On the screenshot i select him in red.

And i paste photo with old & new drive

[Torsten.]

Can you post the I/O module details from CV?

If one module per chassis is OK, consider to pull the suspect module and push it back in.