HPE EVA Storage

Disk replacement in EVA4400

 
Askhat
Visitor

Disk replacement in EVA4400

I Problem with disk replacement in EVA4400, One is drives dead and i replacement drive at new disk. After I have add in group and see message: EVA4400-mgmt: Operation Failed

The target device is not in the right condition to perform the operation HP EVA 4400

http://youtu.be/_4vzK_bq_-o 

Please, help me! 

P.S.: Можете ответы писать на русском!

5 REPLIES 5
Torsten.
Acclaimed Contributor

Re: Disk replacement in EVA4400

Could you please pull the disk again and check model and part no? Maybe it is not an EVA drive?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Askhat
Visitor

Re: Disk replacement in EVA4400

P/N 9x4004-144 

 

Torsten.
Acclaimed Contributor

Re: Disk replacement in EVA4400

Looks like a valid disk with a bit older firmware. This should not be the problem.

 

Could you paste a screenshot when you select the disk details in CV?

 

What is the EVA firmware (you will see this at the first page if you select the EVA).

 

 

 

 

 

EDIT:

 

 

I saw your video - there is one loop lost, we need to solve this problem first.

 

Check the hardware tree what elements are marked in yellow and get the details of these devices.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Askhat
Visitor

Re: Disk replacement in EVA4400

I paste all screenshot.

Please see

I have have problem with one I/O module (attachment), may be his dead. On the screenshot i select him in red.

And i paste photo with old & new drive

Torsten.
Acclaimed Contributor

Re: Disk replacement in EVA4400

Can you post the I/O module details from CV?

 

If one module per chassis is OK, consider to pull the suspect module and push it back in.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!