EVA 4000 Parse File

 
SOLVED
Go to solution
joeysf
Occasional Contributor

EVA 4000 Parse File

Dear all,
Am dealing with an EVA 4000 (PN: AD554B), and this what I have as
System information:
1- ocp firmware version (FW: 1.9 API: 1.2)
2- Controller version (7.0 ECO: 0)
3- XCS version (HSV200 _V6000)
4- XCS build version: (6000CR0D63)

And this is what I got form the management agent event log:
Parse File for this firmware version: CR0D63 â not found. Please Upload file: HSV200_event_CR0D63_6000.txt

How is it solved, please advice.
attachmenet is the LogEventFile

thanks in advance
4 REPLIES 4
joeysf
Occasional Contributor

Re: EVA 4000 Parse File

this is again the attachment LogEventFile
Uwe Zessin
Honored Contributor
Solution

Re: EVA 4000 Parse File

You need this text file or a copy of the controller firmware 'superimage' and upload it with Command View EVA.
.
joeysf
Occasional Contributor

Re: EVA 4000 Parse File

well, from where i can get this file or that copy of the firmware "superimage", do i have to contact hp support or what?

thanks in advance
Mark...
Honored Contributor

Re: EVA 4000 Parse File

Hi,
Who did the last code load on your system?
You will probably find that the XCS code will be in the directory that it was put in and you can use this. It will probably be called HSV200.SSS or 200.SSS or 200_6000.SSS.
The parse file is contained within this image.
You can then import this into your CV from view events, controller events and then select the "send parse file" button and enter the location of the xxx.sss file. That should sort things out for you as long as you can find the relevant xxx.sss file.
Mark...
if you have nothing useful to say, say nothing...