1752608 Members
4133 Online
108788 Solutions
New Discussion юеВ

EVA 4400 NTP Flood

 
webix
Occasional Visitor

EVA 4400 NTP Flood

Hello Folks

I detected a problem on my EVA yesterday. He's doing NTP flood to several IP adresses on internet.
Anybody can point me to a way to solve the issue? I suspect someone is doing a DDoS amplification attack from it.

I wanted to update the EVA firmware but i don't have a contract and the hardware is out-of-warranty. So... if someone can provide a firmware so i can re-install it would be the best.

Regards

4 REPLIES 4
veeyarvi
HPE Pro

Re: EVA 4400 NTP Flood

Hello Webix,

You need an active contract to get access to the EVA XCS versions.


I am an HPE Employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
webix
Occasional Visitor

Re: EVA 4400 NTP Flood

Hello veeyarvi.

Thank you.

Can you please point me to where i can make a contract?

veeyarvi
HPE Pro

Re: EVA 4400 NTP Flood

Hi Webix

You can reach your local HPE representative or support contacts for this.

Or you can try the beolw URL

https://ssc.hpe.com/portal/site/ssc/?action=determineNodeContents&nodeId=29219 





I am an HPE Employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
Torsten.
Acclaimed Contributor

Re: EVA 4400 NTP Flood

The EVA itself has no network connectivity at all.
Did you connect the management module?
What firmware is running on it?
You can download CV 10.3 and patches, if your XCS version is supported for it.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!