EVA 4400 firmware update

[julmisgo]

Hi everybody,

our customers san EVA 4400 represents recurent problems that we could not detect, the basic troubleshooting we've done, was to restard all the infrastructure. the logs gaves nothing. after a deep study of the infrastructure, i noticed that the firmware of the all infrastructure firmware remains at the purchase date at 2008. we suspect that all the problems faced could be firmware. 

here are the versions: 

controllers : 09003000     model number: HSV300

enclosures : 0062

cv 8.0

Now i would like to update firmware version to the latest, and my question is:

1.) can i update from this version (listed above) to the latest version (listed below)?

controllers: 11300000

cv: 10.3

enclosures: unknown

2.) or do i need to upgrade first to previous version before the 11300000?

PS: please provide some important links if possible, i'm trying to find by  my side.

thanks for your help

[Torsten.]

First cold install command view 10.3 and ptch to 10.3.6, then see

http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=mmr_kc-0114222

[julmisgo]

thank you Torsten,

your answere is very helpfull. i think i'will run into problems because there's some intermediate firmware ugrade before reaching the 11300000 xcs firmware version. the interdiate seems to be no more available, i tried everywhere but nothing. if someone can help with some links containing the media of these versions:

- XCS 09534000

- XCS 10001000

- XCS 11200000

according to the link you sent me, i've to go through these versions listed above first, and finally reach the latest version.

thank for your help.

[Torsten.]

Here is the firmware page:

http://h20564.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=3664408&swLangOid=8&swEnvOid=54

09534000

http://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=3664408&swItemId=co_140928_1&swEnvOid=54

10001000

http://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=3664408&swItemId=co_140973_1&swEnvOid=54

11300000

http://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=3664408&swItemId=co_140926_1&swEnvOid=54

Make sure to sign in and register your product.

Don't forget to check the disk firmware (same page) and update the management module (firmware is in CV bundle)

[julmisgo · Accepted solution]

Awesome Torsten,

thanks to you, thanks to everybody. i still cannot download the ISOs because for reasons i don't understand, my HP ID is not allowed to remove the file protection. thanks you for taking time to help me.