HPE EVA Storage

EVA 4400 rebuild issues

 
Ronald7
Occasional Visitor

EVA 4400 rebuild issues

Hi

 

I got a used EVA 4400 today with 2 shelves and overall 24 disks. I was able to reset the management and assign a new IP address for managing.

 

Now the problem begins: On the storageworks login (port 2373) I always get the message "Multiple System Configurations Detected" but in the dropdown for "System Configuration" is just an empty field. When I click on "Select System Configuration" I just get the error message: "Command execution failed. Error: Status code: 32"

 

I would like to reset all past configurations (as I don't know it) and set it up from zero. Is there any way to achieve that?

 


Thanks you for your help.

 

Regards

Ronald

2 REPLIES 2
giladzzz
Honored Contributor

Re: EVA 4400 rebuild issues

Hi

you have to login to management console and un-initialize the system

once you mange to do that you can create a new system but you need

at least command view license to manage it

regards

Ronald7
Occasional Visitor

Re: EVA 4400 rebuild issues

What do you mean with the management console? Is it the serial MfG port? If yes, does it matter on which controller (or do I have to use it on the disk array)?

If you mean the management GUI on port 2373, I just get that error message on each menu, so I can't do anything there.

 

Thanks in advance.