HPE EVA Storage

EVA 5000 AND SOLARIS 9,10 SECURE PATH PROBLEM WHEN CHANGE SAN SWITCH

 
PEDRO RAMON
Occasional Advisor

EVA 5000 AND SOLARIS 9,10 SECURE PATH PROBLEM WHEN CHANGE SAN SWITCH


WHEN THE SAN SWITCH CHANGE, THE SecurePath NOT WORK PROPERLY, THE SWITCHES OLD ARE 2 / 32 AND NEW SON 8 / 34.

ATACH MESSAGES.

thanks!!!
6 REPLIES 6
Prokopets
Respected Contributor

Re: EVA 5000 AND SOLARIS 9,10 SECURE PATH PROBLEM WHEN CHANGE SAN SWITCH

Have you checked zoning? Are there any errors on new switch?
PEDRO RAMON
Occasional Advisor

Re: EVA 5000 AND SOLARIS 9,10 SECURE PATH PROBLEM WHEN CHANGE SAN SWITCH

IT´S ALL CHECK.


THANKS!
PEDRO RAMON
Occasional Advisor

Re: EVA 5000 AND SOLARIS 9,10 SECURE PATH PROBLEM WHEN CHANGE SAN SWITCH


NO ERROR FOUND IN CONFIGURATION OR NEW SWITCH.


Prokopets
Respected Contributor

Re: EVA 5000 AND SOLARIS 9,10 SECURE PATH PROBLEM WHEN CHANGE SAN SWITCH

Can you please attach switchshow and zoneshow output from the new switch?
Marcus Schack
Trusted Contributor

Re: EVA 5000 AND SOLARIS 9,10 SECURE PATH PROBLEM WHEN CHANGE SAN SWITCH

One thing you might be able to try if your environment allows, is to put the old switches back in and see if Secure Path works. If it is still "dead" then the issue is not with the new switches. Also, are the new switches set up exactly like the old ones? Not only in zoning, but port settings, Port Based Routing, etc.
Sagar Sirdesai
Trusted Contributor

Re: EVA 5000 AND SOLARIS 9,10 SECURE PATH PROBLEM WHEN CHANGE SAN SWITCH

HI Pedro,

I would suggest running the spconfig -o command to recreate the Secure Path config files.

Sagar