HPE EVA Storage

EVA 8400 multiple single port on fibre (SPOF) errors

 
mrrickyjones
New Member

EVA 8400 multiple single port on fibre (SPOF) errors

We have an EVA 8400 running 09534000. We have had about 5 drives in the past couple weeks report Controller detected only one port of a FC device. HP recommends reseating the drive and this clears the error, but this is happening way too frequently for my liking. I have found some older threads where people had this on the 4400's and was supposedly fixed with a firmware update. Is anyone else having these issues? Any suggestions for a fix? All the drives reporting spof are in different enclosures/bays. Thanks.
1 REPLY 1
Torsten.
Acclaimed Contributor

Re: EVA 8400 multiple single port on fibre (SPOF) errors

Without knowing details of your array a disk firmware update is worth to try.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!