EVA 8400 show warning symbol and Condition status is Populated ( Data Disk )

Pujianto · ‎03-16-2018

Dear All,

recently i'm facing problem with EVA8400, currently this is my first experience with EVA8400 unit..

I look warning symbol at enclosure 13 and Bay 1. and i look status condition operational state is Populated ( Data disk) with warning symbol . Please see attachment.

What the meaning of this, and what can i do to resolved it .

Thanks for your help.

Torsten. · ‎03-16-2018

the disk drive tab may have more details, but it looks like a failed disk.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!

HanCas · ‎03-16-2018

Select the Disk tab,and see if that gives more infomration.

It may well be the disk is only seen on one loop e.g. loop A and not B

Check the event log and look for events for this disk...

.

vibeesh1 · ‎04-24-2018

Hi

It can be due to so many reasons. Are you seein the same Disk under "Ungrouped". Mostly a Disk issue. EVA logs could help us to give more information

Thanks!

Vibeesh V

EVA 8400 show warning symbol and Condition status is Populated ( Data Disk )

EVA 8400 show warning symbol and Condition status is Populated ( Data Disk )

Re: EVA 8400 show warning symbol and Condition status is Populated ( Data Disk )

Re: EVA 8400 show warning symbol and Condition status is Populated ( Data Disk )

Re: EVA 8400 show warning symbol and Condition status is Populated ( Data Disk )

Hewlett Packard Enterprise International