EVA 8X00

 
godfather-1
Advisor

EVA 8X00

Hi

i have one dl380  and install operating system is 2008 and install cv version 10 (first cv is 9.4 and now update to 10)

and one eva 8400 . i update xcs to 11001000 but when update endi did not access to eva and command view error is controller not found.
please help.

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: EVA 8400

You need CV 10.1, 10.0 is not working with this firmware.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
godfather-1
Advisor

EVA 8X00

Hi 

tanks for help

if any need patch for operarting system?

Jan Soska
Honored Contributor

Re: EVA 8X00

No, you need newer version of Command View for EVA - version 10.1 . As written above, CV v10 is not compatible with newes EVA firmwares.

 

Go to software depot at HP. https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=P6000_CV10.1

 

It requires active support for EVA (if I am not wrong)

 

Jan