EVA Sequence

[ess]

Hi All
I Know How To Get User Guide Step-By-Step Eva Sequence At First Start Up To Finish or Ready To work For Example
1- install command View
2- on the eva
3- connect to san switch
if any document in hp for this subject.
tanks for best help.

[marty199]

unload EVA from pallet is the first step:)
1. connect controller to SAN switch
2. power on the san switch,it will take long time to ready status.
3. connect DL380G5 to san switch
4. power on DL380G5
5. power on EVA
6. recover DL380G5's OS and install command view&FC adapter drivers,if needed.
7. run command view and discover the EVA
8. initial EVA
9. create disk group
10. create host
11. create Vdisk
12. present Vdisk to host

[Patrick Terlisten]

Hello,

what kind of EVA do you have?

Best regards,
Patrick

[ess]

Hi
I have Eva 8100.
if any document hp release to how start and configuration .
i need one check list to start.
tanks.

[DogBytes]

Hi ess,

perhaps this link would help:

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&taskId=101&prodClassId=-1&contentType=SupportManual&docIndexId=64180&prodTypeId=12169&prodSeriesId=3664583

All the best,

- R.