HPE EVA Storage

EVA and Zoning problem

 
BrianDoyle
Trusted Contributor

EVA and Zoning problem

EVA6400 and HP 4/24 SAN switch

I've cabled 2 host ports of each controller to the switches and enabled the switch ports.
In Port Admin i see the EVA WWN but cannot see the WWN in Zone Admin to create an Alias.

I've hardzoned the ports to an alias and it works but this is not a solution.

Can anyone suggest anything to try?
thanks
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: EVA and Zoning problem

I have never seen this before - maybe a switch related (firmware) problem?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
BrianDoyle
Trusted Contributor

Re: EVA and Zoning problem

I restarted the EVA controllers (separately) and they just appeared!
thanks
krusty
Honored Contributor

Re: EVA and Zoning problem

FYI - More correct way to state is you used "port based zoning", as WWN zoning is also "hard zoning" (meaning using the ASIC rather than the name server, i.e secure)

Glad you "self resolved" you issue.

Cheers,

Curt
"In Vino Veritas"