EVA4000

 
wan.muqit
Occasional Contributor

EVA4000

I need to upgrade EVA4000 firmware from 6000 to latest.

Command View EVA V6.0.2 Build 37
SAN Switch Brocade fw level v5.0.1b
Got win2000 & 2003 Blade Server (C7000 enclosure) connected.

What do I need to do? Can i upgrade directly to the latest fw? for CMV can i upgrade from v6.0.2 to v9.3?
4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: EVA4000

Get a CV license from HP. Upgrade CV, EVA, disks, switches and server side components.

At least for the switches you need to upgrade step by step (refer to the many related threads in this forum).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
wan.muqit
Occasional Contributor

Re: EVA4000

do you know what is the minimum version do i need to upgrade for all the components if i need to upgrade the eva to version 6220?
Sheldon Smith
HPE Pro

Re: EVA4000

Check HP's SPOCK site for all supported version information: http://www.hp.com/storage/spock

Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo

Peter Mattei
Honored Contributor

Re: EVA4000

Besides checking the SPOCK streams documents also read the EVA SW compatibility matrix and the respective CV and XCS release notes.
They tell you about supported components and prereqs.

Go trough here: http://welcome.hp.com/country/us/en/support.html

Cheers
Pete
I love storage