EVA4100 Battery status is holding charge

[manuj kumar]

Hello All

I am facing a problem with the EVA4100 controller battery.
one of the second controller batteries status changed to "holding charge"
and a strange Led indication appeared

The Status led flashing green and then the Fault led flashing amber
yesterday at afternoon the fault indicator stopped and the status led started to flash green slowly, today it went back to the first status again, one green and one amber with normal frequency.

It will be highly appreciated if somebody help me in this.

thanks
M

[Víctor Cespón]

If you check the EVA user guide, there's a table that shows you what the LEDs mean:

Status indicator Flashing + Fault indicator Flashing =
Battery is undergoing a scheduled battery load test, during which the battery is discharged and then recharged to ensure it is working properly. During the discharge cycle, you will see this display. The load test occurs infrequently and takes several hours.

Status indicator Flashing + Fault indicator Off = Battery is undergoing a full charging process.

[manuj kumar]

thanks vcespon for reply

i already checked the manual,

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01681338/c01681338.pdf

it is noted in the table that, while load test, status flashing + fault OFF

that's why i am confused

thanks

[Uwe Zessin]

The "Status Flashing + Fault Off" appears two times in the table - maybe that was a cut&paste error when creating the manual.

[Víctor Cespón · Accepted solution]

Check a more recent version of the manual...

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01721462/c01721462.pdf

The table has been corrected.

[manuj kumar]

Thanks friends