EVA4400 Boot Error

 
sdonohue1994
Occasional Visitor

EVA4400 Boot Error

I am trying to reuse a previous EVA4400 for some noncritical data. Both the System and the Controllers (1 &2) show as unknown.

When I pull up the Message logs I see the below errors:

EVENT_INFO_CONTROLLER2_RUNNING

TE 0.(00) - Pre-DOG Reporting

TE 2.(02) - HW code check

TE 4.(04) - PCI-e config

TE 6.(06) - Cache memory test
MIST Complete.

Completion Status: Multiple Error
First Failed TE: 6.(06) Test: 12.(0c) Error Code: 060c0100
Completion Status: Hard Error

%Uncorrectable error detected during DIMM address test%
Failed TE: 6.(06) Test: 12.(0c) Error Code: 060c0100 BUD Address:
210c62d8
Addr of Error: 00000000 00040000
Expected Data: xxxxxxxx 7ffbffff Pattern: xxxxxxxx 00000000
Actual Data: xxxx
xxxx aaaaaaaa Mask: xxxxxxxx xxxxxxxx
Completion Status: Hard Error
%Uncorrectable error detected during DIMM address tes
t%
Failed TE: 6.(06) Test: 12.(0c) Error Code: 060c0100 BUD Address: 210c633c
Addr of Error: 00000000 00020000
Expected
Data: xxxxxxxx 7ffdffff Pattern: xxxxxxxx 00000000
Actual Data: xxxxxxxx aaaaaaaa Mask: xxxxxxxx xxxxxxxx
Completion St
atus: Hard Error
%Uncorrectable error detected during DIMM address test%
Failed TE: 6.(06) Test: 12.(0c) Error Code: 060c0
*** boot error report - b7150010,80000000,00000000,00001800,b7,15,1

 

1 REPLY 1
veeyarvi
HPE Pro

Re: EVA4400 Boot Error

Hello sdonohue1994

It appears there is a memory failure in the controller. It could be with one of the DIMMs (but also there is a possibility of a slot issue). If the array is under support, you can reach the support to look in to that. If not, you may opt pay for material/human efforts to fix the issue for you.


Regards,

Veeyaarvi 


I am an HPE Employee
Accept or Kudo