HPE EVA Storage

EVA4400 Link to switch failed

New Member

EVA4400 Link to switch failed

Hello everyone,

I have the following issue.

I can't make the second host port (FP2)  of the second controller of my EVA connect to the SAN network. The other 3 ports works fine and the only difference between them is that port FP2 of  the controller 2 is showing  value 00-00-00  at the address parameter in the command view.

Kind regards

Johan Guldmyr
Honored Contributor

Re: EVA4400 Link to switch failed



first check so that the port isn't configured for Direct Connect.


If it's not that, perhaps you can swap SFP/cable with a working port and see if that solves your problem.