HPE EVA Storage

Re: EVA4400 performance documentation

 
AlecMac
Occasional Advisor

Re: EVA4400 performance documentation

It produces charts with an overview of latency, throughput etc.

It also produces performance and utilization graphs for all element of the EVA, from physical discs to LUNS to ports including mirror port activity. And it identifies LUNS that are initiating proxy reads or writes and displays this traffic. Other parts show the busiest LUNs and even busy physical discsâ ¦.

I need to re-build it a bit as itâ s only written for a single disk group, wonâ t take long. Iâ ll setup an FTP location this evening and let you know.
AlecMac
Occasional Advisor

Re: EVA4400 performance documentation

I'm McMac by the way :) I couldn't remeber my login from my home PC
Mikko Niskanen_1
Frequent Advisor

Re: EVA4400 performance documentation

Aye, nice sneak peek McMac! I've been having thinking to do the same thing with evaperf output.

Any chance of sharing the effort, please?
McMac
New Member

Re: EVA4400 performance documentation

Hi

if anyone wants to ftp to 82.68.229.118 , username and password is perfmon, I'll run the report and post back here.
CLEB
Valued Contributor

Re: EVA4400 performance documentation

McMac, that ftp site seems to be done.
AlecMac
Occasional Advisor

Re: EVA4400 performance documentation

Hi CLEB,

the firewall is open now.

Just to confirm, the tool analyses EVA perf logs, generated by the command;

e.g


evaperf all -csv -cont 10 -dur 7200 -ts2 -sz 5000-xxxx-xxxx-xxxx > c:\perf_bench.csv

The variables are:

-cont frequency of snapshot (seconds)
-dur duration of capture (seconds)
-sz wwn name of eva
Xavi.e.r
Frequent Advisor

Re: EVA4400 performance documentation

Hey AleMac/McMac,
I am trying to put the evaperf file in your ftp but I get 550 eva.7z: Forbidden filename

Do unto others as you would have them do unto you
AlecMac
Occasional Advisor

Re: EVA4400 performance documentation

Hi Xavier,

I've enabled unicode support. No idea if it will help...

If not I'll get another method. Other people have used it OK, so I hope it works for you.