HPE Community
HPE EVA Storage
1753972 Members
7862 Online
108811 Solutions
New Discussion юеВ

EVA4400 - ungrouping disks and levelling

 
james9999
Occasional Contributor

тАО07-25-2010 03:42 PM

тАО07-25-2010 03:42 PM

EVA4400 - ungrouping disks and levelling

Hi

I am in the process of ungrouping one of disk in the Default Disk Group. The levelling process seems to have stopped at 99% complete

Does this mean the levelling process has completed and I can safely remove the disk?

Thanks
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО07-25-2010 09:08 PM

тАО07-25-2010 09:08 PM

Re: EVA4400 - ungrouping disks and levelling

Check if the status of the disk is "ungrouped".

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
V├нctor Cesp├│n
Honored Contributor

тАО07-26-2010 03:24 AM

тАО07-26-2010 03:24 AM

Re: EVA4400 - ungrouping disks and levelling

Ungroupping can stop because there's not enough space free on the disk group, or because there are errors on the disk and cannot be read. Check those two things.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.