HPE EVA Storage
1753482 Members
4430 Online
108794 Solutions
New Discussion юеВ

Re: EVA5000, How do I assign disk to machines?

 
jorgen325
Frequent Advisor

EVA5000, How do I assign disk to machines?

So while I am researching zoning, I was wondering how I assign a Vdisk to a computer?

I have created a Vdisk, a host and presented it to the host. I am using the management server as the host because I have not yet connected any other hosts.

Thank you!

4 REPLIES 4
jorgen325
Frequent Advisor

Re: EVA5000, How do I assign disk to machines?

jorgen325
Frequent Advisor

Re: EVA5000, How do I assign disk to machines?

Anyone tell me where the batteries are?

Have to be on the controllers right? In the front? The two power supply looking boxes that slide out?
jorgen325
Frequent Advisor

Re: EVA5000, How do I assign disk to machines?

Can I bypass the write cache feature to get around the bad batteries?
Sheldon Smith
HPE Pro

Re: EVA5000, How do I assign disk to machines?

The batteries are behind the controller front cover plates. They snap on/off.

"...bad batteries" Sorry, no. I get to see this from time to time where the array was shipped, plugged in, then shut down and the batteries left in for ... weeks or months. In one case close to two years. When powered back up, the batteries are all bad having done a DEEEEEEEEEEEP discharge. Bad cache batteries need to be replaced, then allowed to at least get to their minimal charge.

Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo