HPE EVA Storage

EVA6100 Installation

 
SOLVED
Go to solution
VIJDSA
Advisor

EVA6100 Installation

Hello Experts,

I am setting up an EVA 6100 and would like to know from the experts step by step procedure.
The hosts where the LUNS would be presented are HPUX 11.31 and RHEL 5.


Thanks

Vij
5 REPLIES 5
Rob Leadbeater
Honored Contributor

Re: EVA6100 Installation

Hi,

From what point do you need to start ?

Is the EVA working at all ?

Cheers,

Rob
Víctor Cespón
Honored Contributor
Solution

Re: EVA6100 Installation

VIJDSA
Advisor

Re: EVA6100 Installation

Hi Friends ,

I want to start from scratch , Its ony rack mounted .
NXS
Valued Contributor

Re: EVA6100 Installation

did you already cabled the controller to the disk enclosures en loop switches ??
connected the FC port to the sanswitch and to the management server and create a zoning??

spread the disks evenly over all disk enclosures. Power on loop switches and the disk enclosures.
Power on 1 controller and 1 minuter later start the second one. Enter wwn and checksum into the display on the EVA controller.

Install the CVEVA on your management server
login to the EVA and initialize the EVA, flash the XCS FW and the disks.

K
VIJDSA
Advisor

Re: EVA6100 Installation

Nope ! I need to implement this next month . As i understand from now I need to do everything

1. Install the EVA.
2. Do the Zoning in the san Switches
3. Present the LUNS to the needed HPUX Boxes and windows boxs.
. Appreciate if you have Guidelines or a Step to step procedure with you . I have got some Docs which have been referred but I just wanted to go through with some Experienced mates.

Regards
Vij