HPE EVA Storage

EVA6100, loope switch port 12 have thousend of invalid ordered sets have been detected

 
kflliman
Occasional Advisor

EVA6100, loope switch port 12 have thousend of invalid ordered sets have been detected

Dear All,
we have EVA6100 2C8D and 2 loop switch, enclosure 4 connected to port 12 of the loop switch, but port 12 have been detected thousands of invalid ordered sets and all disks of enclosure 4 lost one loop connection, I changed the cable, and the IO Module of the enclouser, but still have connection lose, 

the question is: maybe the loop switch port was faluty, could I move the cable of that enclosure from port 12 to another free port(like port 5, or 6)  ? are all loop switch ports transperant and have no addressing effects ?

Thanks in advance :)

 

2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: EVA6100, loope switch port 12 have thousend of invalid ordered sets have been detected

Because it is a loop switch you can use any other port and try.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
kflliman
Occasional Advisor

Re: EVA6100, loope switch port 12 have thousend of invalid ordered sets have been detected

Thanks, wil  try that.