HPE EVA Storage

EVA6400 2C3D to 2C5D Cabling Diagram Needed

 
Daniel Lewis_4
Occasional Contributor

EVA6400 2C3D to 2C5D Cabling Diagram Needed

Hello all!  I am currently working to add 2 M6412A disk enclosures to my EVA6400.  What I am missing is a diagram of how to correctly cable a 2C5D configuration.  If anyone can provide such documentation I'd appreciate it.  The way the EVA shipped was 1 rack with a C7000 blade chasis below the SAN.  So what I have from the bottom up is the C7000 on the bottom then 3 disk enclosures and finally my 2 SAN controllers.  The 2 new disk enclosures are mounted above the 2 SAN controllers.  Without drawing a picture the list below best depicts the setup as it sits in the rack.

 

M6412A Disk Enclosure (New)

M6412A Disk Enclosure (New)

HSV400 SAN Controller

HSV400 SAN Controller

M6412A Disk Enclosure

M6412A Disk Enclosure

M6412A Disk Enclosure

C7000 Blade Enclosure

2 REPLIES 2

Re: EVA6400 2C3D to 2C5D Cabling Diagram Needed

Please find attached the diagram for EVA6400 2C6D. Hope this helps you.

 

_______________________________________________________________________________

 

How to assign points on this new forum? Click the Kudos Star!


I work for HPE
Accept or Kudo
Daniel Lewis_4
Occasional Contributor

Re: EVA6400 2C3D to 2C5D Cabling Diagram Needed

Appreciate the response.  I've seen the 2C6D diagram but really need to see the 2C5D diagram.  By chance do you have that diagram?