HPE EVA Storage

Error After replacing HP X-1800 Storage Server's Motherboard

 
Atif Noor
Occasional Advisor

Error After replacing HP X-1800 Storage Server's Motherboard

Dear All,

We have replaced the Motherboard of HP X-1800 Storage Server having Windows Storage Server 2008 and connected to HP Storage Through FC SAN Switches.The HP Commcand View EVA (9.1) Software was installed on this Server.

After Replacing the motherboard we find the error message "The server you are running cannot run HPStorage Works Network Storage System Software properly. You may be in violation of your licence agreement.
Please contact HP Support immediately. The server will reboot in 10min."

Kindly Share any solution/info if any one have to overcome this issue.
4 REPLIES 4
Michal Kapalka (mikap)
Honored Contributor

Re: Error After replacing HP X-1800 Storage Server's Motherboard

hi,

check the Product Number in

ROM Based Setup Utility (RBSU)

we havde similiar problem during the reinstallation of x1600.

hope you will fix it.

mikap
Atif Noor
Occasional Advisor

Re: Error After replacing HP X-1800 Storage Server's Motherboard

Hi Mikap


Thank you very Much for your kind support. The issue has been resolved as per your suggestion i-e by inserting the PID in RBSU.


Thanks again for your kind support.


Regards,

Atif Noor
Premier Systems Pvt. Ltd
Atif Noor
Occasional Advisor

Re: Error After replacing HP X-1800 Storage Server's Motherboard

The issue has been resolved through suggestion given by forum members.

Plz insert the PID in RBSU if any one find the same error.

Thank you for HP Support Forum.


Regards,

Atif Noor
Michal Kapalka (mikap)
Honored Contributor

Re: Error After replacing HP X-1800 Storage Server's Motherboard

hi,

if you are satisfied assign points next time.

or just reopen this thread and assign points.


mikap