Firmware - Brocade/HP Silkworm 200

[Phil.Pearce]

Hi,

I've got some HP Branded Fibre Switches, which are the brocade silkworm 200 I beleive. Im currently on firmware version 6.2.0g.

Can anyone tell me where I can get the latest firmware from?


Thanks

[Zygmunt Krawczyk]

You need to know, which exactly models you have. Firmwares for HP B-Series switches are available from

http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?lang=en&cc=pl&taskId=135&prodTypeId=12169&prodCatId=304609

[Sudhakar Subramaniam]

Hi,
You can download the latest version from the below link depending on the OS.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1143933&prodTypeId=12169&prodSeriesId=1143930&swLang=8&taskId=135&swEnvOID=54

[Phil.Pearce]

Cheers.

Ive logged into the switch

Just says SLKWRM 200 im not sure what the HP branding name is.

[Sudhakar Subramaniam · Accepted solution]

silkworm 200 is normally a 4gb switch and the above one should work

[Don Mallory]

From the 4Gb switches and on (around the beginning of 5.x f/w rev), Brocade went to a monolithic firmware set instead of a single targetted image.

It means that the download is larger, but the switch will figure out which f/w set it needs, so one firmware will fit them all (so to speak). It also meant that instead of looking like an appliance, you can see it runs a version of Linux and which packages
it installs.

So the short answer is, it really doesn't matter, pick the family (4Gb, 8Gb, etc.) and you'll get the right one. After you untar it, you should be able to check if your silkworm series is in there.

[Johan Guldmyr]

Yeup, if you do a switchshow you will see the switchtype.

Then untar the firmware file, in there you will have directories.

SWDBxx - where XX would be your switch type.

[TechHelp24]

I have created a DOC in the Brocade Community.

http://community.brocade.com/docs/DOC-1643

here are the moust Switch Type listed.

[Johan Guldmyr]

Doesn't have OEM names though ;)

I think the 200 is a 4/8 or 4/16 in HP language.

[Louis Henninger_1]

The Brocade Silkworm 200 is the HP 4/16 SAN switch.

regards,

Louis