HPE EVA Storage

HP COMMAND VIEW 9.3 NO LOGGIN

 
PEDRO J. RAMON
Advisor

HP COMMAND VIEW 9.3 NO LOGGIN


I have EVA 4000 and upgrade to xcs 6220 fw, when install Command View 9.3 see this error when loggin-.

""Login failed. Security services not available. Ensure security services are running.""

Thanks
11 REPLIES 11
hvhari
Esteemed Contributor

Re: HP COMMAND VIEW 9.3 NO LOGGIN

Hello Pedro, can you check the following

a.system running cveva has a valid IP address
b.Path variable in windows should include the directory "c:\windows\system32"

Please let me know how it goes.

With regards
Hari
Regards,
Hari

If this post was useful , click the Kudos Star on the left side to say Thanks!
Bhavnish Kamboj (BK)
Trusted Contributor

Re: HP COMMAND VIEW 9.3 NO LOGGIN

Prakash Singh_1
Esteemed Contributor

Re: HP COMMAND VIEW 9.3 NO LOGGIN

You can Try this :

1. Set the correct IP address of the SMA in C:\Windows\System32\drivers\etc\host .
2. Go to C:\Program Files\Hewlett-Packard\ and Delete XFROOT folder.
3. Go to C:\Program Files\Hewlett-Packard\XF in CLI prompt and Run install.bat C:\Program Files\Hewlett-Packard\XFROOT
4. Start HP Infrastructure Management service from C:\Program Files\Hewlett-Packard\XF\bin\win-32>XfAppMgr register
XFSecurity.cfg

You can start the service now.
net start xf

Regards,

Prakash
Regards,

PS
To assign points on this post? Click the white Thumbs up below!
Víctor Cespón
Honored Contributor

Re: HP COMMAND VIEW 9.3 NO LOGGIN

And remember that only English and Japanese versions of Windows are supported. Most of the times I have seen CV 9.3 installation fail was because it was in an unsupported OS.
DeafFrog
Valued Contributor

Re: HP COMMAND VIEW 9.3 NO LOGGIN

Hi Ramon ,

I faced exactly the same problem few days back , we tried the medthod mentionedin the thread and the solution suggested by Prakash.

the solution that worked for us was to
1)make sure the machne hosting the Cv EVA is connected to n/w.
2)remove the alredy installed CV eva , it will fail to remove 2 directories , it's ok , as these will contain your previous liscenses.
3)Reinstall the Cv eva .\

Reg,
FrogIsDeaf
Bhavnish Kamboj (BK)
Trusted Contributor

Re: HP COMMAND VIEW 9.3 NO LOGGIN

Hi Ramon,

any luck with above troubleshooting steps in link?

BK
PEDRO J. RAMON
Advisor

Re: HP COMMAND VIEW 9.3 NO LOGGIN


Thanks to all!!!

The Command View OS are installed in Spanish, the 9.3 version only supported Inglish or Japanese.

I don´t change Spanish version OS, I´m Install 9.2 version and work fine all.

Matthias Zahn_1
Advisor

Re: HP COMMAND VIEW 9.3 NO LOGGIN

Hi,

today, I had upgraded from 9.21 an had the same error. The problem was:

The service "HP MIF" (whatever it is) failed to launch. After I had read this thread, I found the reason: the folder Program Files (x86)\Hewlett-Packard\XFROOT contain a mystify NTFS ACL. Simply add "system" and "Administrators" with full control, inherited this to all subfolder, kill the process "xf.exe" an restart the service "HP MIF".

Now, you can logon.
Matthias Zahn_1
Advisor

Re: HP COMMAND VIEW 9.3 NO LOGGIN

Sorry,

this was not the solution, because after Ih had restartet the server, the NTFS ACL of "XFROOT" is wrong again an the service "HP MIF" hang at startup.

Who is changing the NTFS ACL ????