HP EVA 4400 Evaperf to Wmi

[Sebastian Rumpf]

Hi there,

I'm trying to get some EVAPerf data trough wmi, but when i run the wmic Command on a linux machine

wmic -U DOMAIN/ADMINISTRATOR%password //IP "select * from Win32_PerfRawData_EVAPMEXT_HPEVAHostPortStatistics"

I only get

ERROR: Retrieve result data.
NTSTATUS: NT code 0xc0001010 - NT code 0xc0001010

Running the Request on Win32_PerfRawData gets me Results but Win32_PerfRawData_EVAPMEXT doesnt get any data except the error above.

If anyone could help me i would be thankful

P.S. This thread has been moevd from General to Storage Area Networks (SAN) (Enterprise). - Hp Forum Moderator

[Uwe Zessin]

I don't have the thread number, but remember somebody wrote that it does not work reliable for him either and when he contacted HP got told it was 'unsupported'.

[Sebastian Rumpf]

that doesnt sound good -.-

I have installed Evaperf on another Server with eva 4000 and its works without making problems. I get all of the EVAPMEXT data without any errors.

I ran wmiadap /F on the machine not working but that didnt have any effect.

(sorry for my bad english :D )

[Sebastian Rumpf]

ok solved my problem by reinstalling Commandview 9.1 ...

[Sebastian Rumpf]

look at last post