HPE Community
HPE EVA Storage
1752821 Members
4339 Online
108789 Solutions
New Discussion

Re: HP EVA 6100 connected to HP BLADE 460c on Linux

 
toni osta
Frequent Advisor

‎08-31-2009 12:25 PM

‎08-31-2009 12:25 PM

HP EVA 6100 connected to HP BLADE 460c on Linux

Hi all
I have EVA 6100 that i need to connect to HP C3000 enclosure , (FC Pass Thru module switch )
the HP blade is BL460 c and the OS is red hat linux 5
i need to know how i can have the multipathing software for the Linux ?
the HBA on the BL460c is HP BLc Emulex LPe11 05 FC HBA Opt Kit

Thank you

0 Kudos
Reply
1 REPLY 1
Víctor Cespón
Honored Contributor

‎08-31-2009 12:37 PM

‎08-31-2009 12:37 PM

Re: HP EVA 6100 connected to HP BLADE 460c on Linux

For this kind of information, check http://h20272.www2.hp.com/.

So, we search for an EVA6100 and RHEL 5

For an LPe1105, you need firmware 2.72a2, driver 8.2.0.22_p4.

Multipathing can be handled on several ways, check the Path Management section.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.