HPE Community
HPE EVA Storage
1753856 Members
7620 Online
108809 Solutions
New Discussion юеВ

Re: HP EVA 9.2 Alert

 
Duffster
Valued Contributor

тАО07-07-2011 04:44 AM - last edited on тАО01-04-2015 07:27 PM by

тАО07-07-2011 04:44 AM - last edited on тАО01-04-2015 07:27 PM by

HP EVA 9.2 Alert

Hi,

 

I have noticed an alert (red "X") on my command view EVA against the "Controller Enclosure" with an "Operational State" as "Failed". However when I view the 2 controllers they are fine and in a good operational state. There does not appear to be any errors on the controller event log.

 

Can anyone please advise on the best course of action for this scenario?

 

R,

D.

 

 

P.S. This thread has been moved from General to Storage Area Networks (SAN) (Enterprise). - Hp Forum Moderator

0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО07-07-2011 05:02 AM

тАО07-07-2011 05:02 AM

Re: HP EVA 9.2 Alert

Sometimes it helps to restart the CV service in order to get current information.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Johan Guldmyr
Honored Contributor

тАО07-07-2011 05:36 AM

тАО07-07-2011 05:36 AM

Re: HP EVA 9.2 Alert

Are they OK even if you go into the tabs? Like power & cooling ports etc?
0 Kudos
Reply
Duffster
Valued Contributor

тАО07-07-2011 06:40 AM

тАО07-07-2011 06:40 AM

Re: HP EVA 9.2 Alert

Yes, the power and cooling ports are all fine also.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.