HP EVA P6000 LUNs not present

[CH1]

We have 3 LUNs created and presented to 1 linux server. But after a few times of restarting the Linux server, we still cannot found it using fdisk -l

The 3 LUNs are under a replication group from PROD to DR. The 3 LUNs are in DR.

As part of troubleshooting, we created a new LUN and present to the same Linux, once Linux is restarted, we can found it.

Any ideas? Thanks.

[giladzzz]

Hi

Luns in DR are write protected and it's not good to use them

but you can create a snapshot and present it to your server

Regards

[CH1]

Actually, we have

1. Failover and suspend in DR replicate group
2. Present the 3 LUNs to Linux
3. Reboot Linux
4. Create a new LUN in DR
5. Reboot Linux
6. The newly created one can be found

To use the DR LUNs, do we need to create a snapcopy of all the LUNs? And after we mount them, perform the testing, can we delete it?

Thanks.

[giladzzz]

hi

you are not clear what your problem is.

as I said destination LUNs in DR are write protected so if you want to test them

the best way is to create a snapshot of the LUN present to your server and work on the snapshot.

when you finish your test you can delete the snapshot.

Regards