HP EVA SMI

 
Murthy_4
Occasional Advisor

HP EVA SMI

Hi All,

I have a small program which tries to fetch the instances for the HP EVA SMI Provider classes.
Previously(with SMI for CV EVA 8.x) when queried I was getting the instances for HPEVA_StorageSystem, HPEVA_StorageCapabilities, HPEVA_StorageProduct, HPEVA_PhysicalPackage and so on. But now(with SMI for CV EVA 9.x) the program fails to retrieve the instances. On checking the MOF, I found the classes as CIM_RegisteredProfile, CIM_Namespace and so on but not the former.

Is there a way that I could get the instances for HPEVA_xxxxxx? Is this something to be done with the SMI configuration?

Please let me know.

Thank you in advance.

Regards,
Sam.
6 REPLIES 6
Anil Kumar Noone
New Member

Re: HP EVA SMI

there is no change b/w 8.x and 9.x SMI-S EVA.
Please check if you are using right name space- root/eva to contact SMI-S EVA Provider.

Also please share exception logs if there are any to debug the issue..
Murthy_4
Occasional Advisor

Re: HP EVA SMI

Hi Anil,

Thank you for replying.

Yes, I am using the namespace as root/eva. But I am getting the instances only for HPEVA_StorageSetting.

Earlier I used to get the instances for HPEVA_StorageSystem, HPEVA_StorageCapabilities, HPEVA_StorageProduct, HPEVA_PhysicalPackage and so on using the same program.


Regards.
Anil Kumar Noone
New Member

Re: HP EVA SMI

can you copy and paste the test o/p of HPEVA_StorageSetting ?
Are you able to see EVA arrays using CV EVA GUI ?
Adam Wambolt
Occasional Contributor

Re: HP EVA SMI

May want to try reinstalling the SMIS providers, this can be done without affecting Commandview and does not require a reboot.
Murthy_4
Occasional Advisor

Re: HP EVA SMI

Hi Anil,

Pease find the file attached.

By the way, connecting to CV EVA GUI I am able to see proper information related to the Array, Array Controllers,Disk Groups, Virtual Disks and so on.

Anil Kumar Noone
New Member

Re: HP EVA SMI

Ok, there seems to be some issues with EVA discovery via SMI-S ! Could you please capture Provider/CIMOM logs and send it across ?