HPE EVA Storage

HP EVA3000 / AIX 5.3 / Antemeta / Missing Paths

 
Andreas Lieser
New Member

HP EVA3000 / AIX 5.3 / Antemeta / Missing Paths

Hi!

We do have HP EVA3000 subsystems with VCS 3.x, so we have to use Antemeta MPIO-Software for Multipathing with AIX 5.3.

The Problem is, that -- after rebooting AIX, one path per disk (out of four) is missing! Running 'cfgmgr' again re-enables this path.

Any ideas?

Some additional information:

AIX oslevel: 5300-08-03-0831
Antemeta:
Fileset Level State Description
----------------------------------------------------------------------------
Path: /usr/lib/objrepos
devices.fcp.hdi.hsv100.rte
2.2.2.0 COMMITTED EVA 3000 Device FCP HDI
Support AIX 5.3
devices.fcp.hdi.pdisk.rte 2.2.3.3 COMMITTED Antemeta pseudo subsystem disk
support for IBM FC AIX 5.3

If you need any additional information, please let me know!

And thanks a lot in advance!

Best regards,
Andreas.

 

 

P.S. This thread has been moevd from Disk, Disk Arrays (Retired Discussion Board) to Storage Area Networks (SAN) (Enterprise). - Hp Forum Moderator