HPE EVA Storage

HP EVA4400 is normal , but I can't find Controller-1 information in the CommandView EVA.

 
Taohung
Frequent Advisor

HP EVA4400 is normal , but I can't find Controller-1 information in the CommandView EVA.

HP EVA4400 *1 (XCS 0952200) + 450GB 15K rpm *12
HP StorageWorks 8/8 Base (0) e-port SAN Switch *2
HP 8Gb Short Wave B-Series FC SFP+ 1 Pack *16
HP DL360G6 *1 + HP StorageWorks FC2143 4Gb PCI-X 2.0 HBA *1 (Command View Host)
5 m LC-LC Multi-Mode Fibre Channel Cable *5

When I login WOCP & CV in the ABM, every option is normal. Controller-1 and controller-2 are normal.

When I login CV in the SBM, only controller-2 is shown. Controller-1 is gone.

Does everyone help me ? Thank you.
6 REPLIES 6
ess
Super Advisor

Re: HP EVA4400 is normal , but I can't find Controller-1 information in the CommandView EVA.

hi
what is version command view?
ess
Super Advisor

Re: HP EVA4400 is normal , but I can't find Controller-1 information in the CommandView EVA.

hi
what is version command view?
what is windows install in command view.
Víctor Cespón
Honored Contributor

Re: HP EVA4400 is normal , but I can't find Controller-1 information in the CommandView EVA.

Controller may be hanged. You should check controller event log. Try to restart Controller 1 from Command View or WOCP.

Update that firmware to 09534000, there are too many reasons for a firmware hang on previous firmwares.
Thomas Callahan
Valued Contributor

Re: HP EVA4400 is normal , but I can't find Controller-1 information in the CommandView EVA.

I thought 09534000 was in a testing only stage? Not available to general public. Or has this changed?
gregersenj
Honored Contributor

Re: HP EVA4400 is normal , but I can't find Controller-1 information in the CommandView EVA.

09534000 has been released.

Thursday 17th, from what I have been told.

BR
/jag

Accept or Kudo

Taohung
Frequent Advisor

Re: HP EVA4400 is normal , but I can't find Controller-1 information in the CommandView EVA.

Windows 2003 SP2 Enterprise Edition
Command View 9.1