HP EVA4400

 
CarlosAlb
Occasional Visitor

HP EVA4400

Good Morning,

For disk space reasons, I had to temporarily add an expansion drive to the my EVA-4400 with 12 disks of 1Tb in RAID-0. The problem is that one theses disks has failled and I have no access to all the contents of the drive. I need have access to the data urgently and found the following option on the console:

Disk Group Hardware Failure

- The following Vdisks and data replication groups have failed as a result of a hardware failure in this disk group.

- Failed Vdisks

- Virtual Disks\VOLUME-TEMP\VDISK-TEMP

- Failed Data Replication Groups

- No failed DR groups

 

I ask you which one with two options listed should I follow to recover and have access to the expansion data considering that I have a new disk to replace the defective one?

Regards.

1 REPLY 1
giladzzz
Honored Contributor

Re: HP EVA4400

Hi

if your disk was created with Raid-0 your data is lost you can recreate your disk

but your data is gone.

Regards