HPE EVA Storage

HP G3 P2000 - locks up after snap pool removal

 
felipeg007
Occasional Contributor

HP G3 P2000 - locks up after snap pool removal

 

I have a pretty weird situation everyone. Deleting Snap pools locks up controller.

 

I was able to delete LUN 25 with no errors or lockups.

When I deleted the snap pool for LUN 25, - Controller A-  locked up.

 

Before rebooting the entire unit. I tried the following.

 

  • Restart management
  • Shutdown storage controller – error storage is not currently availble
  • Restart storage controller

 

Nothing worked. After about an hour other LUNS on - controller A-  were starting to break communication with my Windows servers. Even though i have controller B setup as backup the luns were not communicating correctly.

 

So I rebooted the entire system.

 

After the first reboot I noticed that -Controller A- was still not performing correctly.

I performed a second reboot. And still was having issues with -Controller A-.

 

After the 3rd reboot,  I logged on to the GUI and rebooted the management service on -controller A-.

The card was finally in a normal state and accessible via a web browser.