HPE EVA Storage

HP MSA 2324FC to G3 Combo controller

 
SOLVED
Go to solution
Matt Morris_1
New Member

HP MSA 2324FC to G3 Combo controller

We currently have a 2324FC with dual controllers in house. We are looking at upgrading them to the G3 combo controller so that we can take advantage of the remote snap capability. From what I read it says you can do in in place upgrade but am not sure if that means powering down and replacing both controllers? Can I remove one while it is running and insert the new one and then after it has performed any syncs needed then insert the next one? Has anyone done one yet?
3 REPLIES 3
Uwe Zessin
Honored Contributor
Solution

Re: HP MSA 2324FC to G3 Combo controller

According to:

""Upgrading the HP StorageWorks MSA2000 G2 to the P2000 G3 MSA technical paper - 4AA0-8304ENW__20100218 - February 2010""

..you have to shut down the whole system.

.
Matt Morris_1
New Member

Re: HP MSA 2324FC to G3 Combo controller

Thanks for the information. For some reason I could not find the document though I kept seeing reference to one. I just needed to scroll down to the white papers.

Matt Morris_1
New Member

Re: HP MSA 2324FC to G3 Combo controller