HPE EVA Storage

HP MSA CONTROLLER SCSI Array Device

 
JasonWoerner
Frequent Advisor

HP MSA CONTROLLER SCSI Array Device

I have attached an MSA1500cs LUN to a Windows 2003 server via fibre. I can access the LUNs from within Windows, but the Device Manager is showing the MSA as an unknown device as shown in the subject line of this post.
Is there a driver I can install or some other procedure I can follow to identifiy this device properly? On other servers using the same storage, the device reads as "StorageWorks MSA1000/1500".
4 REPLIES 4
ess
Super Advisor

Re: HP MSA CONTROLLER SCSI Array Device

Hi
1-are you install service pack install the system?
2- run the psp on the server.
(psp available in the smart start).
JasonWoerner
Frequent Advisor

Re: HP MSA CONTROLLER SCSI Array Device

I'm not sure what you mean by service pack. We are up to date with Microsoft updates, and Windows Server 2003 service packs.

I installed the 8.30 PSP and rebooted. The issue remains.

Anyone else with any ideas?
Brett Watkins
New Member

Re: HP MSA CONTROLLER SCSI Array Device

Hi Jason

You will need to apply the HP MPIO drivers to your server.

Assuming you have version 7 Active/Active firmware, you will need the Full Featured DSM for MSA 1000/1500 version 3

Regards
Brett
Brett Watkins
New Member

Re: HP MSA CONTROLLER SCSI Array Device

The best way to find the software is to go to www.hp.com and click on Support & Drivers

Search for HP MPIO DSM and you will be able to choose the correct OS and version for your configuration

Regards
Brett