HP StorageWorks 8/8 SAN Switch ...

[m.jamali]

hello,
i have a san switch 8/8 am867a,
i want to know what is a ip address default of that because i want to connect to a consol san switch,and change the ip address.
what can i do for change the ip address san switch,
thanks,

[Johan Guldmyr]

Hi!

Looked a little in the manual

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01898156/c01898156.pdf

Turns out some of the brocades have DHCP enabled by default.

Some have default IP 10.77.77.77 so please try that too.

You can also connect to the serial port on the switch and set the IP that way.

[m.jamali]

hello my friend ,
i really thank you for answering ,
have a good time,bye

[Johan Guldmyr]

No problem, don't forget to give points to posts here on the forum :)