HP eva 8100 licence

 
Sergey321
New Member

HP eva 8100 licence

I have a hp eva c 8100 disk array with 23 GB. After broke one of the controllers . The license does not apply . I can not enter this license again. I lost control of my HP eva 8100 .

 

Regards
Sergey.

 

 

P.S. This thread has been moved from ProLiant Storage Systems to Storage Area Networks (SAN) (Enterprise). - Hp Forum Moderator

5 REPLIES 5
Prakash Singh_1
Esteemed Contributor

Re: HP eva 8100 licence

Hi,

 

You can try the below steps:

 

 

Remove all the available licenses.,

You can generate license with the following format and try installing.

WWN Format: 5001-4380-1138-7430

 

 

Regards,

PS
To assign points on this post? Click the white Thumbs up below!
Greybeard
Esteemed Contributor

Re: HP eva 8100 licence

Hello,

 

replacing a controller would have no impact on Command View licenses, has command view been re-installed?  The screenshot shows no license installed rather than license invalid.

 

Was the EVA re-initialised, do you have more than one install of command view. Can you please go through exactly what happened.

 

Thanks

_________________________________________________
How to assign points on this new forum? Click the Kudos Star!
ss321
Occasional Visitor

Re: HP eva 8100 licence

Hello

 

Faulty controller repaired and it works. The problem with the license remains. How to make a new license because wwn is my other?

License information:

 

 

ss321
Occasional Visitor

Re: HP eva 8100 licence

Hello !

 

EVA does not reinitialize. Command View is not rearranged.
She worked as usual. I regularly went to command view for monitoring work.
One day I came in and saw that no license. Before it was nothing unusual. Then the controller was dead.

Now faulty controller repaired and it works.

Greybeard
Esteemed Contributor

Re: HP eva 8100 licence

Hi ss321, did you resolve this issue?

_________________________________________________
How to assign points on this new forum? Click the Kudos Star!