HPE EVA Storage

HPCC and EVA4400 embedded switches

 
Dirk Vandeweyer
Advisor

HPCC and EVA4400 embedded switches

Trying to collect HPCC info from embedded EVA4400 brocade switches.
HPcc says: collecting...saving in directory...
Directory stays however empty.
By means of test we filled in a wrong password for one of the switches. Running HPCC again says: collecting... tels that password for one switch is wrong...saving. Only 1 file is produced, the one from the switch with the wrong password.
Any clue?
3 REPLIES 3
gregersenj
Honored Contributor

Re: HPCC and EVA4400 embedded switches

have you set the password on the switches?

HPCC will ot run if you havn't set the password on the switches.
If you have default password setting on a brocade switch, you will be prompted to change the PW, ei when you telnet to the switch.
This will caurse HPCC to fail

BR
/jag

Accept or Kudo

Dirk Vandeweyer
Advisor

Re: HPCC and EVA4400 embedded switches

Solved by using telnet instead of ssh.

Dirk.
gregersenj
Honored Contributor

Re: HPCC and EVA4400 embedded switches

:)

Accept or Kudo