HPE Community
HPE EVA Storage
1752273 Members
4655 Online
108786 Solutions
New Discussion

Re: HPUX 11.11 with EVA 4400

 
terry123
Regular Advisor

‎12-04-2009 01:50 AM

‎12-04-2009 01:50 AM

HPUX 11.11 with EVA 4400

hi All,

i would like to connect HPUX 11.11 to EVA4400 directly, with multipath using PVLink.

may i know how can i setup the prefer path? from PVLink or EVA?

is direct connect support prefer path setting? or only support under SAN switch environment?

thx.
b.r.
terrytse
0 Kudos
Reply
1 REPLY 1
shathish
New Member

‎01-04-2010 09:28 PM

‎01-04-2010 09:28 PM

Re: HPUX 11.11 with EVA 4400

Hi Terry,

As i know, Multipath should be able to have disks available though 1 of 2 HBA fails. Disks will be available on alternate card in case of primary card failure. And it is default in HPUX OS itself.

Shathish
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.