HPE EVA Storage

HSV 200 _ CR0B42xc3p-5031 - compatible latest CV

 
JaYKaY_1
Advisor

HSV 200 _ CR0B42xc3p-5031 - compatible latest CV

what is the latest CV supported with HSV 200 _ CR0B42xc3p-5031
3 REPLIES 3
Mark...
Honored Contributor

Re: HSV 200 _ CR0B42xc3p-5031 - compatible latest CV

Hi,
I believe that CV6.0 is the "latest" version of CV you can use with XCS 5.031. Later versions *may* work but are not on the info I have.
You should obviously consider moving to XCS 6.220 which is the last/latest code for your product.
Mark...
if you have nothing useful to say, say nothing...
Jan Soska
Honored Contributor

Re: HSV 200 _ CR0B42xc3p-5031 - compatible latest CV

Hello,
I agree with mark - go to 6220 firmware and use latest CV 9.2.1

Jan
JaYKaY_1
Advisor

Re: HSV 200 _ CR0B42xc3p-5031 - compatible latest CV

Dears,
When I went through the Documentations I can see ( CV 7.0.1)

..Prerequisites

Install HP Command View EVA 7.0.1 on a management server only if HP Command View EVA 7.0 is already installed..

..HP Command View EVA

Enhancements


For this release, the following enhancements have been made to HP Command View EVA:

HP Command View EVA supports firmware version VCS 4100, which provides the following new features:

Windows Server 2008 (denoted as Windows LH in the Command View EVA GUI) host mode.

Online hard disk drive firmware upgrade.

Migration state and progress indicator displayed while disk is in ungrouping state.

Disk serial number is displayed.

Display of license alert message is restricted.

During Instantâ on license period, if the EVA has the Command View General license, and is not using any Business Copy and Continuous Access features, then the license alert message is not displayed.

Soo I beleive 7.0.1 will support