HPE EVA Storage
1748249 Members
3659 Online
108760 Solutions
New Discussion

How can I upgrade CV 10.0.0 to 10.2?

 
NavyYard
Valued Contributor

How can I upgrade CV 10.0.0 to 10.2?

Hi,

 

(CV General 10.0.0 and business copy)

 

I have downloaded Command View upgrade software to upgrade CV 10.0.0 to 10.2 version.

 

I do not have the documentation and I can not locate it on HP website.

 

If you have the document, can you please provide me here?

 

Thanks

 

 

3 REPLIES 3
giladzzz
Honored Contributor

Re: How can I upgrade CV 10.0.0 to 10.2?

Hi

It is not an upgrade kit it's a full installation what it does is when you run the installation file it uninstalls the existing verion reboots the server and then installs the new version.

actually the latest version is 10.3 and there is a patch 10.3.2

Regards

 

AnkitM
Trusted Contributor

Re: How can I upgrade CV 10.0.0 to 10.2?

The HP P6000 Command View 10.3.2 software can be obtained at the HP Support Center (http://h20566.www2.hp.com/portal/site/hpsc/public/ ) by signing into your account.

 

To obtain the HP P6000 Command View Suite Installation Guide and the HP P6000 Command View Suite 10.3.2 Release Notes :

  1. Go to http://www.hp.com/support/manuals .

  2. Under storage , click Storage Software .

  3. Under Storage Device Management Software , click HP EVA P6000 Device Management Software , then click HP P6000 Command View Software .

    • For the installation guide, click Setup and install - general , then click HP P6000 Command View Suite Installation Guide .

    • For the release notes, click General reference , then click HP P6000 Command View Suite 10.3.2 Release Notes .

For specific requirements regarding HP P6000 Command View Software, see the HP P6000 EVA Compatibility Reference :

  1. Go to http://www.hp.com/support/manuals .

  2. Under storage , click Storage Software .

  3. Under Storage Device Management Software , click HP EVA P6000 Device Management Software , then click HP P6000 Command View Software .

  4. Click General reference , then click HP P6000 EVA Compatibility Reference .

 

Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award KUDOS! to the person providing the answer. This helps others searching for a similar issue.
Torsten.
Acclaimed Contributor

Re: How can I upgrade CV 10.0.0 to 10.2?

To get the latest version:

 

Install P6000 CommandView 10.3

 

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=P6000_CV10.3

 

then latest patch 10.3.6

 

http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5158106&swLangOid=8&swEnvOid=1005

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!