HPE EVA Storage

How to Replace cache Batteries ?

 
Digi-I
New Member

How to Replace cache Batteries ?

We have hp EVA3000 with dual hsv100 controllers.
one of our hsv100 controller is displaying a red LED next to the battery sign.In command view both the battery module status is failed but charger status is Good.So we need to replace the cache batteries of the hsv100 controller.Can you pls give me some step by step instructions abt how to replace cache batteries in hsv100 controller? Thanks in advance.
6 REPLIES 6
AnthonySN
Respected Contributor
Basheer_2
Trusted Contributor

Re: How to Replace cache Batteries ?

Hello Digi,

This is really easy. Usually HP does.
Just pull out the blinking Battery and replace with the new one.

it usually takes about 24 hours to fully charge.

you can monitor this in the CV.
Torsten.
Acclaimed Contributor

Re: How to Replace cache Batteries ?

As said in the first answer, the procedure may depend on the firmware version. If unsure, ask the support.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
buffelo
Visitor

Re: How to Replace cache Batteries ?

anyone know how to replace this? seems like the link given above no longer exist. below is the battery pack. please help. thank you.

https://www.amazon.com/HP-Battery-pack-Controller-Enterprise/dp/B008M10LUS

Mike Texter
Valued Contributor

Re: How to Replace cache Batteries ?

I think the changeover from hp.com to hpe.com screwed up the original link.  Here's an updated one (for EVA5000, but same thing)  http://h20566.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=321347&docId=emr_na-c00024681&lang=en-us&cc=us

Hardware Specialist
buffelo
Visitor

Re: How to Replace cache Batteries ?

Dear Mike, appreciated.