How to save configuration of P2000G3?

[Mike O.]

I have two P2000 G3 units that we've had for a couple of months. We've configured them for our needs as secondary/archival storage.

I realize I'm probably missing something basic, but how do I save the configuration? I'm assuming there is the ability to save the configuration to another machine so that it can be restored in the event of a problem and/or system replacement.

I've searched the SMU reference guide, the P2000 CLI guide, and general web searches, but I can't find anything.

[Prakash Singh_1 · Accepted solution]

Hi Mike,

For the above there isn't any tool to save configuration but if you save the logs they contain all configuration parameters.

You can chk page no. 133 in the link for SMU reference guide for the System log contents.

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02520791/c02520791.pdf

Regards,

Prakash

[Mike O.]

Thanks. I had seen the info to download the system logs, but I didn't realize that would also contain the configuration info.