Implementing P2000 G3 P2000 G3 10GbE iSCSI controllers

[daedro]

Hi,I want to implement this cabine, and I dont know exactly which switch and cables I have to use. Somebody can send me the p/n of the switch and cables that is compatible with this cabine.
thanks a lot.

[Andras Ordogh · Accepted solution]

hello daedro!

use the following quickspec (p2000g3):
http://h18000.www1.hp.com/products/quickspecs/13551_na/13551_na.pdf

page 34. Step 4b - Choose Supported Options For 10GbE Infrastructure

andras

[daedro]

thank you so much Andras,in this document appear, cables and sfp, do you know some document where show the switches too.
thanks

[Andras Ordogh]

hello,

there are a lots of switch avaible, depend on port number, cost etc.
if you want to use hp networking, you can use Product Bulletin, what is a collection of quick specs.
You can download it and use offline, or use the online version.
Download offline from:
http://h18000.www1.hp.com/products/quickspecs/productbulletin.html#CD_Files

or use online:
http://h18000.www1.hp.com/products/quickspecs/productbulletin.html#intro

In product bulletin, you can find all avaible hp switch (online: product bulletin home / quickspec / worldwide / hp networking / managed switch)
check the series 6xxxx

and you can find the quickspec of p200g3, with the cabling option (storage product / disk storage system / modular smart array / p2000g3) or servers and server options too.

andras

[daedro]

Thank you very much Andras

[Andras Ordogh]

You're welcome!
Please don't forget to assign points :)