Licenses CA

 
SOLVED
Go to solution
Xav0
Advisor

Licenses CA

Hi guys

I have a question regarding the licensing of Continuous Access to the difference between these two licenses:

-HP Continuous Access EVA6000 Series 1TB Software License

-HP Continuous Access EVA6000 Series Unlimited Software License

I appreciate your support in advance.
6 REPLIES 6
Víctor Cespón
Honored Contributor
Solution

Re: Licenses CA

Easy, the first one is for 1 TB of data, the second one is unlimited (you can use all the capacity of the EVA)
Xav0
Advisor

Re: Licenses CA

Thanks for the reply, now ......

I have an EVA6100 which have 5 licenses, 4 1TB and 1 Unlimited, and the CV I mark that is already 90% of his discharge, being that there is an Unlimited license. Why is that?.

Now, if I remove the 4 licenses 1TB I can use in another EVA?
Víctor Cespón
Honored Contributor

Re: Licenses CA

Command View 9.1?
That version often fails to recognize EVAs6000 and 6100, it does not see the loop-switches and thinks it's an EVA4000/4100. So the license is not valid as it's for an EVA6100.

Go to hardware - Rack 1 - Controller enclosure - Controller A - Device ports

See if you see an switch 8xx there.

Refresh the page
Go to top of the CV tree and do a rediscover
Restart CV service
Clear browser cache

A combination of all that has solved the licensing problem in all cases I've seen.

Attach an screenshot of the licensing page if it does not work.
Xav0
Advisor

Re: Licenses CA

thanks for the reply, now ......

So far I have no access to the CV, but given time if I remove the 4 licenses 1TB I can use in another EVA?
Uwe Zessin
Honored Contributor

Re: Licenses CA

> Now, if I remove the 4 licenses 1TB I can use in another EVA?

No, the license key it locked to the existing EVA's WWN. As far as I can tell you cannot transfer an existing license to a new WWN.
.
wittaya_s
New Member

Re: Licenses CA

How many DR group that we can create on 1TB license?